TYM T474 - Coolant Warning Lamp; Combination Switch

DESCRIPTION OF TRACTOR CONTROLS
2 - 6
The high beam can obstruct the
view of other drivers coming
in the opposite direction on a
road, leading to an unexpected
accident.
•
WARNING
COMBINATION SWITCH
(1) Light switch operation
The light switch can be operated with
the main switch in the "ON" position.
「OFF」 - All light OFF
- Instrument lamp, tail lamp
and low beam lamp ON.
- Instrument lamp, tail lamp
and high beam lamp ON.
►
T253O206A
Turn
signal
switch
Turn signal(RH)
Turn signal(LH)
Light switch
Horn switch
The high beam can obstruct the
view of other drivers coming
in the opposite direction on a
road, leading to an unexpected
accident.
•
WARNING
COOLANT WARNING LAMP
This comes on when temperature of
coolant is overheated while the
main switch is in the "ON" position.
In this case, stop driving and take
any necessary action according to
the troubleshooting instructions.
☞ Ref to the page 8-
3 for「
Trouble-
shooting」section.
►
V
w{vG\[W
Y\
ZW
XWW
YW
X\
XW
\
W
Z\
[W
XYZ[U\ o
T4HO207A
The engine can be damaged if
increasing its speed too fast.
•
NOTE
T474NH-영문-02(나).indd 6 2019-06-14 오전 9:49:44