HAZARD SWITCH
This switch can be used to warn
other vehicles when malfunction oc-
curs in the tractor while driving on
a public road. When pressing the
switch once, the left and right haz-
ard warning lamps blink. Pressing
the switch again turns off the lamps.
►
T4HO208A
Hazard switch
(2) Turn signal lamp operation
The turn signal lamps can be op-
erated with the main switch in the
"ON" position.
Left turn
Turn the turn signal switch counter-
clockwise. Then, the left turn signal
lamp and the left turn signal indica-
tor on the instrument cluster blink. If
one side is blinking, The other side
is still on.
Right turn
Push the turn signal switch clock-
wise. Then, the right turn signal
lamp and the right turn signal indi-
cator on the instrument cluster blink.
•
•
(3) Horn
The horn can be operated with the
main switch in the "ON" position re-
gardless of the light switch.
Operating- Press the switch
sounds the horn.
This lever is not automatically
returned to the neutral position.
Therefore, set it back to the
neutral position after turn.
If one side is blinking, The other
side is still on.
•
•
NOTE
To Next Page
Loading...
