< Examples of useful conditions
of 4WD >
The 4WD can be used under the
following conditions
①
When cultivating in a field.
②
When traction is required on a
slope, in a wet field or for towing
a trailer.
③
When working in a wet or sandy
field.
④
When When cultivating on firm
soil with a rotavator to prevent
the tractor from being pushed
forward.
⑤
When driving into/out of a field or
going over a field bank.
SEAT AND SAFETY BELT
(1) Seat sliding
The seat can be adjusted by moving
it forwards and backwards with the
seat sliding lever on its front pushed
to the left. After adjustment, make
sure that the seat is firmly secured.
(2) Seat belt
Before driving, adjust the
belt's length to fit to your
body and insert it into its
buckle. When it is engaged
properly, a clicking sound is
heard.
►
Before operating the 4WD lever,
make sure to stop the tractor.
If it is hard to engage the 4WD
lever, do not apply excessive
force to it. Instead, drive the
tractor forward or backward
slightly and try it again.
Avoid using 4WD on public
roads to reduce wear on tires.
•
•
•
NOTE
T4NO221A
Seat Sliding
To Next Page
Loading...
