PTO SHIFT LEVER
「
ON
」-
Pull the shift lever to the "ON"
position to engage PTO.
「
OFF
」
-
Push the shift lever to the
"OFF" position to disen-
gage PTO.
►
Rear PTO
PTO speed 540RPM
Operate the PTO shift lever only
after setting the PTO ON/OFF
switch to the OFF position.
•
NOTE
T254O222A
PTO
safety
cover
PTO
shaft cap
PTO SHAFT CAP
When the PTO shaft is not in use,
grease the PTO shaft and install the
cap to it.
►
It is dangerous to use an imple-
ment at a high speed if it is de-
signed to be operated at a low
speed.
Before using an implement,
make sure to read its owner's
manual.
•
•
CAUTION
T4NO222A
PTO Shift Lever
DANGER
If caught by the PTO shaft, a
severe injury or even death
can occur.
Stay out of the PTO shaft
while it is rotating.
When the PTO shaft is not
in use, place the cap over it.
Also, never remove the PTO
safety cover.
•
•
•
To Next Page
Loading...
