(2) Joystick lever safety device
T h e r e i s a b u t t o n t o l o c k t h e
operation of the joystick lever.
Pulling it forwards unlocks the lever
while pushing it backwards locks
the lever.
Make sure to set the joystick lever
in the neutral position and press
the lock button to lock the lever in
that position when the lever is not
in use. Otherwise, an implement
may fall accidentally by unintend-
ed operation of the lever.
•
WARNING
O P E R AT I N G T I P S F O R
POWER STEERING WHEEL
(1) Ope ra te th e power s teering
wheel only while the engine is
running. You may feel the steer-
ing wheel heavier with a low en-
gine speed.
(2) When an implement, such as a
loader, is attached to the front,
the steering wheel may be felt
heavy with the tractor stopped.
If so, operate the steering wheel
while driving the tractor at a low
speed.
(3) Wh en the ste er ing whe el is
completely turned to one end,
the safety valve is activated to
output the audible signal (relief
sound). When this sounds, avoid
using the steering wheel (O.K.
only for a short time). Also, never
turn the steering wheel com-
pletely continuously.
►
T4NO223A
Rel-
ease
Lock
Lock button
(4) Turning the steering wheel to
its end unnecessarily (with the
tractor stopped) can wear tires
rapidly.
(5) In winter, warm up the engine
sufficiently before use.
(6)
When repairing components,
such as a pipe, make sure that
no foreign material enters the
system.
(7)
The steering wheel can be op-
erated with a small amount of
force. Therefore, operate it with
care and keep your hands on it
at all times.
Releasing the steering wheel
during driving can result in a
collision and rollover. Never re-
lease the steering wheel during
driving.
•
WARNING
To Next Page
Loading...
Need help?
General
