EasyManua.ls Logo

TytoCare TytoHome - Device Cleaning and Disinfection

TytoCare TytoHome
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2021 TytoCare All rights reserved. 10 of 75
TytoHome General Operation User Guide
General Safety Messages
Note: A note provides other important information.
l If for any reason you cannot perform the connection between the Device and the TytoCare
App, contact TytoCare Support.
l When performing a measurement, a date and time stamp is automatically included with the
recording. If you do not see the date and time of the recording, contact TytoCare Support.
l The Device connection screen in the TytoCare App should only be used to connect to
another Device or to disconnect from an existing Device.
l Operating conditions: to 40° Celsius (4 to 104° Fahrenheit) / 15% to 70% humidity (non-
condensing).
l For Tyto Thermometer: 16° - 40° Celsius (60.8° - 104° Fahrenheit).
l Storage conditions: -20° to 60° Celsius / -4° to 140° Fahrenheit / 15% to 70% humidity (non-
condensing).
l When charging, the activity LED will be orange for G1 Devices, or purple for G2 Devices.
When charging is complete, it will turn green for G1 Devices, or blue for G2 Devices.
To identify your model (G1 or G2), see Section - Identifying the Device Model.
l The Device complies with wireless standard IEEE 802.11 g/n (2.4GHz, 5GHz for G2 Devices).
Cleaning and Disinfection instructions
The Tyto Device should be low level disinfected in between uses. Make sure that the Tyto Device is
turned off and thoroughly wipe the Device’s exterior with 70% isopropyl Alcohol wipes or with
pads impregnated with 70% ethyl Alcohol. Allow the Tyto Device for air dry for at least two
minutes before taking a measurement.
Make sure the tongue depressor holder, blade and otoscope tip are disinfected before each use,
using wipes or cloth moistened with 70% isopropyl Alcohol or with pads impregnated with 70%
ethyl Alcohol. Thoroughly wipe the tongue depressor holder, blade and otoscope tip and allow it
for air dry for at least two minutes.Don’t reuse the tongue depressor if signs of material
degradation such as scratches are noticed.
Note: As the Tyto Stethoscope is placed directly on the skin, please use wipes or cloth
moistened with 70% isopropyl Alcohol wipes or with pads impregnated with 70% ethyl Alcohol
to disinfect the membrane of the Tyto Stethoscope (black surface touching the skin) before
each use. Thoroughly wipe the membrane of the Tyto Stethoscope and allow it for air dry for
at least two minutes.

Table of Contents

Other manuals for TytoCare TytoHome