© 2021 TytoCare All rights reserved. 46 of 75
TytoHome General Operation User Guide
Logging in
The following measurements (vitals) can be added:
l Blood Pressure - Enter the systolic and diastolic values, as displayed on the Blood Pressure
monitor you have used.
l Blood Oxygen Saturation (SpO2) - Enter the blood oxygen saturation level, as measured by the
Pulse Oximeter you have used.
l Weight - Enter the patient’s weight, as measured by the weight scale you have used.
l Blood Glucose - Enter the patient’s glucose level, as measured by the glucometer you have used.
l Other - If you want to add additional measurement, not mentioned above, use this option, and
take a picture of the medical device you have used.
After you have entered the measurement result, and verified it is correct, tap Done.
To enable the clinician to see the type of medical device you have used (brand, model etc.), and to
accompany the result you have entered, take a picture of the external medical device you have
used.
Tap Add a picture, and then you can either tap Take Picture to take a picture of the screen of the
medical device now, using your mobile device camera, or tap Photo Library if you’ve already taken
that image and you want to upload it from your camera roll.
When choosing Take Picture, aim the mobile device camera towards the screen of the medical
device. Make sure the measurement result is seen clearly, without reflections. When ready, tap
the blue dot to capture the image. If you want to switch to the front camera, tap the switch
camera icon, located at the upper-right corner.
When choosing Photo Library, tap the relevant picture from your camera roll.
If the measurement result is not seen clearly, tap Retake a picture to capture the medical device
screen again. In addition, you can delete the captured image using the Delete icon, located at the
bottom-right corner of the image.
If you want to provide the clinician with a comment about the measurement result, for example, if
you ate or took some medicine right before the measurement, tap Add a comment to elaborate
on the result.
You can also include lab results and medical documents as part of the Tyto Visit you’re sending to
the clinician.
Medical documents could be a summary of your medical history, previous admissions, or your
doctor’s notes from your last appointment to the clinic.
Tap Add External Exams or Data, and then either Lab Results or Medical Documents. Then, take a
picture of those documents using the mobile device camera, as described above under Add a
picture.
To Next Page
Loading...
