How to fix the interior light on my U-Line ICE-MAKER?
- WWillie PittmanSep 12, 2025
If the interior light of your U-Line Ice Maker isn't working, it could be due to a loose or burned-out bulb. Try tightening the bulb or replacing it.

How to fix the interior light on my U-Line ICE-MAKER?
If the interior light of your U-Line Ice Maker isn't working, it could be due to a loose or burned-out bulb. Try tightening the bulb or replacing it.
What to do if the light won’t go out when the door is closed on my U-Line ICE-MAKER Ice Maker?
If the light in your U-Line Ice Maker won’t turn off when the door is closed, check if the light on/off switch is turned to the 'ON' position. If so, turn the switch to 'OFF'.
| Ice Shape | Crescent |
|---|---|
| Power Source | Electric |
| Voltage | 115 V |
| Installation Type | Freestanding or Built-In |
| Finish | Stainless steel |
| Control Type | Digital |
| Water Supply | Direct Water Line Connection |
| Material | Stainless Steel |
| Warranty | 1 year parts and labor |
Overview of U-Line's pioneering role, innovation, and global market presence.
Instructions for recording unit's model and serial number for service and registration.
Defines hazard symbols: Danger, Warning, Caution, and Important for user safety.
Covers critical safety warnings for installation, operation, and child safety.
Instructions for preparing the installation site, including level surface and temperature.
Emphasizes proper grounding and avoiding extension cords for electrical connection.
Instructions on positioning the unit for proper airflow and door clearance.
Steps for ensuring the unit is level using adjustable feet for optimal performance.
Detailed instructions for connecting the cold water supply line to ice maker models.
Steps for removing and reinstalling the front grille, including control knob removal.
Instructions for correctly installing glass shelves into the unit.
Requirements and clearances for integrating the unit into cabinetry.
Guidelines for installing a custom panel on the unit door, including weight limits.
Instructions for finishing or staining the wood trim on wine racks for the 75 BEV model.
Procedures for removing and reinserting wine racks for cleaning or refinishing.
Detailed steps for changing the door swing direction for various models.
Specific instructions for reversing doors on stainless steel U-Line models.
Methods to ensure proper door alignment and gasket seal.
Information on using and maintaining wine racks in the 75 BEV model.
Steps for initial unit setup, including running overnight and adjusting temperature.
How to adjust the temperature setting for different U-Line models.
Explains typical unit operation, sounds, and ice production for various models.
Special instructions for operating U-Line units in a marine environment.
Procedure for modifying the size of ice cubes produced by the ice maker.
Details on the interior lighting system and its operation.
Step-by-step guide for safely replacing the interior light bulb.
Advice on how to store bottles and stock wine racks for optimal presentation.
Recommended storage temperatures for wine in the 75 BEV unit.
Guidelines for cleaning the exterior and interior of the unit.
Instructions for cleaning the condenser coil every three months for efficient operation.
How to defrost manual defrost models and information on automatic defrost.
Steps to take when storing the unit for long-term non-use.
A guide to identify and resolve common problems with the unit.
Instructions on how to contact U-Line for service and find model information.
Guidance on using only genuine U-Line replacement parts for optimal performance.
Technical details and capacities for various U-Line models.











