ULEAD VIDEO STUDIO 9 - Importing from DVD;DVD-VR

ULEAD VIDEOSTUDIO USER GUIDE
58
Before capturing, you need to choose the following settings in the
Options Panel:
1. Select your TV tuner device from the
Source drop-down list.
2. In the TV channel box, specify the
channel number from which to
capture.
3. Click Options: Video and Audio Capture Property Settings
to open the Video and Audio Capture Property Settings
dialog box. Check if the Video Input source, TV system, and
Audio Input source are set correctly. If not, adjust the settings
accordingly.
Click the Channel tab to choose Antenna or Cable TV, scan
available channels in your region, and more.
For details on this dialog box, see “Video and Audio Capture
Property Settings” on page 173.
Importing from DVD/DVD-VR
You can import DVD/DVD-VR formatted video from a disc or from
your hard drive into VideoStudio.