Operating Instructions
Notices
UFS is not liable for any use of product not in accordance
with UFS’s installation and operating instructions.
Before using this equipment, or for any questions on the
operation of the appliance, consult and follow all instructions
and safety warnings found in the appliance operator’s manual
supplied from the manufacturer of the appliance.
Not all features are available on some models.
The solid state components in this controller are designed to operate reliably in a
temperature range up to 158°F/70°C. Before installing this controller, it should be
verified that the ambient temperature at the mounting location does not exceed
158°F/70°C.
Using a clean damp cloth, wipe down your controller daily using a commercial quality foodser-
vice-approved detergent.
Do not allow oil to build up on any part of the controller.
NEVER use chemical or abrasive cleaners on your controller. The controller’s overlay may be
damaged.
Controller
Operating
Environment
Cleaning the
Controller
30A216 REV A Oct 2009 Page 2
To Next Page
Loading...
Need help?
General