30A216 REV A Oct 2009 9
Controller is in Operating Mode. Actual vat temperature is more
than 10 degrees below the programmed vat temperature.
Controller is in Operating Mode. Actual vat temperature is within
the proper cooking temperature range. The vat is ready to start a
cook cycle.
Controller is in Operating Mode. The actual vat temperature is more
than 40 degrees above the highest programmed vat temperature. A
continuous audible alarm will sound.
Controller’s probe is either open or shorted. Display will be accom-
panied with an audible alarm if shorted. Check or replace the probe.
Controller is in Operating Mode and a cook cycle is in progress.
Controller is in Operating Mode and a cook cycle has been
completed.
Controller is waiting for a pass code to be entered.
Controller is in Product Key Programming Standby mode.
Stage cooking time (1-10) is displayed.
Stage cooking temperature (1-10) is displayed.
Stage timing mode (1-10) (flex or straight) is displayed.
Action alarm status is displayed.
After fryer is filtered, this display prompts you to refill the fryer
with oil.
Controller is in System Programming Standby Mode.
Controller is in Fahrenheit or Celsius Programming Mode.
Controller is in Appliance Type Programming Mode.
Display
Descriptions
To Next Page
Loading...