Name: UNI-T UT33C
Brand: UNI-T
Rating: 5 (1 reviews)

To Next Page

To Previous Page

The Model UT33B: the current measurement has 3 measurement positions

on the rotary switch: 200µA, 200mA and 10A.

The Model UT33C/UT33D: the current measurement has 4 measurement positions

on the rotary switch: 2000µA, 20mA, 200mA and 10A

To measure current, do the following:

1. Turn off power to the circuit. Discharge all high-voltage capacitors.

2. Insert the red test lead into the VΩmA or 10A terminal and the black test lead

into the COM terminal.

3. Set the rotary switch to an appropriate measurement position in A range.

4. Break the current path to be tested. Connect the red test lead to the more

positive side of the break and the black test lead to the more negative side

of the break.

5. Turn on power to the circuit.

The measured value shows on the display.

Measurement Operation (6)

Model UT33B/C/D: OPERATING MANUAL

Questions and Answers:

Need help?

Do you have a question about the UNI-T UT33C and is the answer not in the manual?

UNI-T UT33C Specifications

General