between the testing leads and the circuit under test.
Measurement Operation (10)
E. Diodes and Continuity Measurement (see figure 5)
( figure 5)
Testing Diodes
To avoid amages to the Meter or to the
devices under test, disconnect circuit
power and discharge all the high-voltage
capacitors before diodes.
Warning
Use the diode test to check diodes,
transistors, and other semiconductor
devices. The diode test sends a current
through the semiconductor junction, and
then measures the voltage drop
22
Model UT33B/C/D: OPERATING MANUAL
To Next Page
Loading...
