Name: UNI-T UT33C
Brand: UNI-T
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Measurement Operation (15)

G. The Model UT33B: Battery Test (see figure 7)

To avoid harms to you or damages to the Meter,

please do not attempt to input voltages higher

than 60V in DC or 30V in AC.

Warning

( figure 7)

To test the battery, proceed as follows:

1. Insert the red test into the VΩmA terminal and

the black test leads into the COM terminal.

2. Set the rotary switch to an appropriate

measurement position in range.

3. Connect the test leads across with the battery

being measured ensuring the polarity is correct.

The measured value shows on the display, which

is the voltage between the cathode and anode of

the battery.

Model UT33B/C/D: OPERATING MANUAL

Questions and Answers:

Need help?

Do you have a question about the UNI-T UT33C and is the answer not in the manual?

UNI-T UT33C Specifications

General