Name: UNI-T UT33C
Brand: UNI-T
Rating: 5 (1 reviews)

To Next Page

To Previous Page

l Connect the test leads to the proper terminals as said above to avoid error display.

The LCD will display “1” indicating open-circuit for wrong connection. The unit

of diode is Volt (V), displaying the positive-connection voltage-drop value.

l When diode testing has been completed, disconnect the connection between

the testing leads and the circuit under test.

Measurement Operation (12)

The Model UT33C/UT33D: Testing for Continuity

To test for continuity, connect the Meter as below:

1. Insert the red test lead into the VΩmA terminal and the black test lead into the

COM terminal.

2. Set the rotary switch to .

3. Connect the test leads across with the object being measured.

The buzzer sounds if the resistance of a circuit under test is less than 70Ω.

Note

l The LCD displays “1” indicating the circuit being tested is open.

Model UT33B/C/D: OPERATING MANUAL

Questions and Answers:

Need help?

Do you have a question about the UNI-T UT33C and is the answer not in the manual?

UNI-T UT33C Specifications

General