UNI-T UT33C

Measurement Operation (8)
D. Measuring Resistance (see figure 4)
( figure 4)
Warning
To avoid damages to the Meter or to the
devices under test, disconnect circuit
power and discharge all the high-voltage
capacitors before measuring resistance.
The Model UT33B/UT33C: The resistance
measurement positions are: 200Ω, 2000Ω¸,
20kΩ, 200kΩ and 20MΩ
The Model UT33D: The resistance measurement
positions are: 200Ω, 2000Ω, 20kΩ, 200kΩ,20MΩ
and 200MΩ
To measure resistance, connect the Meter as
follows:
20
Model UT33B/C/D: OPERATING MANUAL