prevent damage of the Meter.
l When the Meter working at an effective voltage over 60V in DC or 42V rms
in AC, special care should be taken for there is danger of electric shock.
l Use the proper terminals, function, and range for your measurements.
l Do not use or store the Meter in an environment of high temperature, humidity,
explosive, inflammable and strong magnetic field. The performance of the
Meter may deteriorate after dampened.
l When using the test leads, keep your fingers behind the finger guards.
l Disconnect circuit power and discharge all high-voltage capacitors before
testing resistance, continuity, diodes and current.
l Before measuring current, check the Meter’s fuses and turn off power to
the circuit before connecting the Meter to the circuit.
l Replace the battery as soon as the battery indicator appears. With a low
battery, the Meter might produce false readings that can lead to electric
shock and personal injury.
Rules For Safe Operation (2)
8
Model UT33B/C/D: OPERATING MANUAL
To Next Page
Loading...
Need help?
General
