Table 2-10 Edge trigger Connected to the table
Pulse trigger means determining the triggering time
based on the pulse width. You can acquire abnormal
pulse by setting the pulse width condition.
Table 2-11 Pulse width Trigger
Set to trigger at the signal s rising edge
Set to trigger at the signal s falling edge
Set to trigger at the signal s rising and falling edges
Set CH1, CH2, CH3 or CH4 as the signal source trigger signal
Set to external trigger or divide the external trigger source by 5
CH1 and CH2 trigger their respective signals alternately
CH3 and CH4 trigger their respective signals alternately
To Next Page
Loading...
