Table 2-28 Waveform record menu
1. When you press this button the system plays back and
displays the number of screens to be played back. By turning
the control knob you can suspend
playback Turn the knob to select display of waveforms in
2. If you wish to continue full playback, press [F4] to stop and
Record button. Press this button then the [MENU ON/OFF] key
to record. The number of screens recorded is displayed. You
can record up to 100 screens of data Recorded data will be
lost when the oscilloscope is powered off This function
is disabled in dual time base roll average and envelop
To Next Page
Loading...
