UniCarriers FD160-2 - Page 142

PERIODIC INSPECTION
4-43
CONTROLS
Checking
item
Service Required Tools Daily
Monthly
(200 hrs)
Trimonthly
(600 hrs)
Semiannually
(1200 hrs)
Annually
(2400 hrs)
Knuckle Check king pin for looseness or damage. Touch
○ ○ ○ ○
Rear axle
Check for bending, damage or wear. Visual
○ ○ ○ ○
Check mounting condition. Test hammer
○ ○ ○ ○
Power
steering
Check for proper operation. Operate
○ ○ ○ ○ ○
Check for oil leaks. Visual
○ ○ ○ ○ ○
Check for loose mounting our linkage. Visual
○ ○ ○ ○ ○
Check high-pressure hose. Operate
● (2 years)
ELECTRICAL SYSTEM
Checking
item
Service Required Tools Daily
Monthly
(200 hrs)
Trimonthly
(600 hrs)
Semiannually
(1200 hrs)
Annually
(2400 hrs)
Starter Check proper engagement of pinion gears. Operate
○ ○ ○
Charger Check for proper operation. Ammeter
○ ○ ○
Battery
Check electrolyte level and clean.
Visual,
auditory
○ ○ ○ ○ ○
Check specic gravity of electrolyte. Hydrometer
○ ○ ○
Electrical
wiring
Check wire harness for damage and loose clamp. Visual
○ ○ ○ ○
Check for loose connections. Touch
○ ○ ○