UniCarriers FD160-2 - Page 143

PERIODIC INSPECTION
4-44
SAFETY DEVICE AND OTHERS
Checking
item
Service Required Tools Daily
Monthly
(200 hrs)
Trimonthly
(600 hrs)
Semiannually
(1200 hrs)
Annually
(2400 hrs)
Overhead
guard and
load backrest
Check for loose mounting. Test hammer
○ ○ ○ ○ ○
Check for deformation, cracks or damage. Visual
○ ○ ○ ○ ○
Turn signal Check for operation and installation. Operate
○ ○ ○ ○ ○
Alarms Check for operation and installation. Operate
○ ○ ○ ○ ○
Lights Check for operation and installation. Operate
○ ○ ○ ○ ○
Back-up
buzzer
Check for operation and installation. Operate
○ ○ ○ ○ ○
Sideview
mirrors
Check for contamination or damage. Visual
○ ○ ○ ○ ○
Check for proper visibility. Visual
○ ○ ○ ○ ○
Meters Check for operation. Visual
○ ○ ○ ○ ○
Rear reector/
license
number plate
Check for contamination or damage. Visual
○ ○ ○ ○ ○
Operator’s
seat
Check for damage or loose mounting bolt. Visual
○ ○
Truck body
Check frame and cross members for damage or cracks. Visual
○
Check loose rivets or bolts. Test hammer
○
Check the results of previous checks. Visual
○ ○ ○ ○ ○
Checks general condition of truck. Visual
○ ○ ○ ○ ○
Counterweight Check mounting bolts for looseness (3 bolts). Test hammer
○ ○ ○
Lubrication
and oil change
After cleaning, check for lubrication of each part of the
truck.
Grease pump
○ (weekly or
50 hrs)
○ ○ ○ ○
Check condition of lubricants. Check
○ ○
[C]