1-2 1000 Series / Guide to Installation, Troubleshooting, and Maintenance
This manual is not intended to provide in-depth service instructions. For service beyond
that described in this manual, please contact Unico or your representative.
1.2.1 Intended Audience
The manual is intended for anyone who will be installing and servicing the drive.
Installation should be performed by qualified electrical personnel to ensure that correct
electrical practices and applicable electrical codes are applied.
The audience is expected to have a basic knowledge of physical and electrical
fundamentals, electrical wiring practices and components, and electrical schematics. No
prior experience with the drive is presumed or required.
Follow instructions
You can prevent injury and damage to the drive or equipment by carefully following the
procedures outlined in this manual.
Follow regulations
All electrical work should conform to the National Electrical Code as well as all state and
local government regulations. Please familiarize yourself with these regulations.
Read both manuals first
Read this manual and the application manual entirely before installing the drive.
To Next Page
Loading...
Need help?
General
