Unicum NERO - Configuration Options; Transportation and Storage

User manual for NERO / NERO INSTANT
Page 7Version 3.2 / December 2017
ТМ
3.3 Transportation and storage
All transportation and storage procedures should be executed very carefully to avoid damaging the
vending machine. All the operations related to lifting and displacement of the vending machine should be
executed using a fork lift. The forks of the lift should be slipped under the vending machine at the spots
indicated on the machine’s packing.
The following should be observed during the vending machine’s transportation:
• The vending machine should be transported only in the original packing;
• The vending machine should be transported in strictly vertical position;
• The vending machine should not be tilted and turned or ipped over;
• It is not permissible to shake the machine or its packing;
• It is not permitted to lift the vending machine, pushing on the side panels;
• It is not permissible to lift the vending machine using ropes, cables etc.
The vending machine should be stored in dry premises where air temperature is in the range of 1 to
40
O
C and level of humidity is no more than 80%.
It is prohibited to stack the vending machines on top of each other in storage. The vending machines
should be stored in vertical position in original packing.
 3.2Congurationoptions
NERO NERO INSTANT