The display has indicators that show the scanner's current operating status. The display information helps you understand how your scanner operates.
Top Line
appears when you press and hold Func to select Function mode in Any Mode.
DSKP appears when data skip is on in Scan/Search Modes.
HOLD appears in Hold Mode.
L/O appears if the system/group/channel/frequency/search is locked out in Hold Mode.
PRI appears in priority mode and blinks in priority plus mode in Scan Mode.
appears to show the signal strength of the Receiving channel or frequency.
will appear if the keylock is on in Any Mode.
will appear and blink (with a tone) if the battery is low in Any Mode.
shows the battery level when you press Vol in Any Mode.
2nd Line
To Next Page
Loading...
