To lock out or unlock a group in scan mode press Hold to hold on any channel.
Press and hold Func then press 7/rcl.
At 'Select System' scroll to the system that contains the group and press E/yes.
At 'Select Group' scroll to the group you want to lock or unlock.
Press and hold Func then L/O to lock or unlock the group.
Press Scan to exit.
Or, use Menu to drill down to the group options and lock/unlock it out there. See '
program group'.
Locking/Unlocking Channels
Contents
There are several ways to get to a channel. Some ways are quicker than others. Some ways you have to be quick with those keys, other ways you can take your time
pressing them. Use what works best for you.
To lock out a channel while scanning quickly press L/O when the channel appears in the display.
Or, quickly press Hold to hold on the channel. Press L/O.
Or, quickly press E/yes to go to the menu for that channel.
Scroll to 'Set Lockout' and press E/yes. Scroll to 'Unlocked', or 'Lockout' and press E/yes.
Or, use Menu to drill down to the channel options and lock it out there. See '
Edit Channel Options'.
To unlock a single channel in scan mode press Hold to hold on any channel.
Press and hold Func then press 7/rcl.
At 'Select System' scroll to system that contains the channel and press E/yes.
At 'Select Group' scroll to the group that contains the channel and press E/yes.
At 'Select Channel' scroll to the channel and press and hold Func then L/O to unlock the channel.
Or, use Menu to drill down to the channel options and unlock it there. See '
Edit Channel Options'.
To unlock all channels in a conventional system in scan mode press Hold to hold on any channel in the system.
Press and hold L/O until 'All Unlocked' appears.
Press Hold or Scan/Srch to resume scanning. Note: This will also enable all your groups (turn the quick keys on).
To review and/or unlock locked out several IDs in a system see
Reviewing Locked out IDs.
To unlock all IDs in a system see
Clear All L/O IDs.
Search/Close Call Options Menu
Contents
These are the settings you should look at before you perform a
Quick Search, Close Call Search, Search and Store, or Close Call Autostore.
To Edit Search and Close Options press Menu. Scroll to 'Srch/CloCall Opt' and press E/yes.
Scroll to the options below and press E/yes. Press Scan/Srch to return to scanning when done with editing.
Freq Lockouts CTCSS/DCS Search Max Auto Store Set Modulation Set Data Skip
Broadcast Screen Repeater Find Set Delay Time Set Attenuator Set Step
Freq Lockouts allows you to review locked out frequencies or unlock all frequencies for Searching and Close Call search.
To Next Page
Loading...
Need help?
General