To Next Page

To Previous Page

Easier to Read BCD396T/UBCD396T Digital Scanner Manual

To program a new channel press Menu. At 'Program System' press E/yes.

At 'Select System' scroll to system where you want to program a channel and press E/yes.

Scroll to 'Edit Group' and press E/yes.

At 'Select Group' scroll to the group that you want to program the channel in and press E/yes.

Scroll to 'Edit Channel' and press E/yes.

At 'Select Channel' scroll to 'New Channel' and press E/yes.

At 'Input Frequency (or TGID)' enter the frequency or ID and press E/yes.

To enter a Conventional Frequency enter the Frequency and press E/yes.

To enter a Motorola Type II ID enter the ID and press E/yes.

To enter a Motorola Type I ID enter the fleet number, press (.)no once for a hyphen, then enter the subfleet and press E/yes.

Note: If you omit the subfleet (still need the hyphen), the scanner treats this field as a wildcard (will treat the subfleet as 1 ID and receive all IDs in the

subfleet).

You can also lock out this subfleet ID so you will not receive it.

To enter a Motorola I-Call ID, press (.)no once then enter the ID and press E/yes.

To enter a Motorola Wildcard (receive any) I-Call ID, press (.)no once then enter 0 and press E/yes.

Note: You can also lock out this wildcard ID so you will not receive I-Calls.

To enter an EDACS ID in AFS (default) format, enter the agency number, press (.)no once for a hyphen, then the fleet and subfleet and press E/yes.

Note: If you omit the fleet and/or subfleet (still need the hyphen), the scanner treats these fields as wildcards (will treat the fleet and/or subfleet as 1 ID and

receive all IDs in the fleet and/or subfleet).

You can also lock out this fleet and/or subfleet ID so you will not receive it.

To enter an EDACS ID in Decimal format, enter the ID and press E/yes.

To enter an EDACS I-Call ID, press (.)no once then enter the ID and press E/yes.

To enter an EDACS Wildcard (receive any) I-Call ID, press (.)no once then enter 0 and press E/yes.

Note: You can also lock out this wildcard ID so you will not receive I-Calls.

To enter a LTR ID, enter the area code (0 or 1) and press (.)no once, then enter the home repeater number (01-20) and press (.)no once, then the user ID (1-

254) and press E/yes.

Note: If you omit the user ID (still need the hyphen), the scanner treats this field as a wildcard (will treat the home repeater as 1 ID).

You can also lock out this home repeater ID so you will not receive it.

Note: If the channel is already stored in the group, 'TGID or Frequency Exists Accept? (Y/N)' appears. Press (.)no to return.

Continue at

Edit Name below.

Press Menu to return to 'Select Channel'. Scroll to 'New Channel' and press E/yes.

Program the rest of the channels the same way.

Edit Channel Options Menu

Contents

Once you have your

Systems Created , Systems Options configured, Groups Created, and your Channels Programmed, you can set your channel options.