!
!
You must
subscribe
through your local
telephone
company to
receive Call
Waiting or Caller
ID on call waiting
service.
While a call is on
hold, CIDCW can
not be received.
Flash and Call Waiting
Placing a Call on Hold
If you have Call Waiting service and a call waiting tone sounds
while you are on a call:
Press on the handset or the key on the
base and then to switch between callers.
Press on the handset or the key on the
base to switch between callers.
You can place a call on hold for 5 minutes. When 5 minutes has passed the call is
disconnected
1) During a call, press .
The call will be put on hold.
If you leave a call on hold for more than ten seconds, the display screen
will read,
2) To talk to the caller press or on a handset. The phone will return back
to the call.
AUSTRALIA:
2
NEW ZEALAND:
talk/flash flash/find hs
talk/flash
intcom/hold
talk/flash speaker
flash/find hs
Line On Hold
BACK OK
Hold, to transfer
Handset #3
Handset #2
[31]
To Next Page
Loading...
Need help?
General
