! Handsets can be in
DirectLink mode
while other
handsets are in
use.
Using DirectLink Mode
To use this feature you must enter the handsets into
Directlink Mode first. To enter Directlink Mode see page 15.
2) Select the handset to which you wish to DirectLink with by
pressing the number keys ( ). Your handset will then
page the other handset.
3) On the receiving handset, press ,
the soft key, or if Any Key Answer is
on, press any number key,
4) When you finish your conversation, press or the
soft key on either handset. Return the handset to the
cradle, or press soft key, and then OK soft key
to return to normal standby mode (canceling
DirectLink mode).
DirectLink call
1) When the phone is in DirectLink standby mode, press
soft key (example of DirectLink from
handset #1).
DirectLink
09
talk/flash
/tone/ < # / >
end
-
ANSWER
,or .
END
CANCEL
SUN 12:00A
Handset #1
DirectLink Mode
CANCEL
DirectLink
To DirectLink
a handset
press [1-9,0]
BACK
DirectLink
Handset #2
END
[64]
EXPANDING YOUR PHONE