Call Transfer Feature
From handset to handset or to the base
1) During a call, press on the handset.intcom/hold
2) Select a handset or the base to transfer the call to within
10 seconds. To select a handset or the base press,
and then press the soft key.
If you select , all other handsets and the base will be paged. An intercom tone
sounds. To cancel the transfer, press , the soft key or on the
initiating handset.
3) To answer a page on the handset, press or
or the soft key.
If Any Key Answer is enabled, pressing a number key,
will answer the page. If AutoTalk is
enabled, you can answer the page simply by picking up
the handset.
To answer a page from the base, press , or the
soft key.
4) To speak to the caller, press on the receiving handset or on the base.
1) During a call, press on the base.
The call will automatically be placed on hold.
2) Select the handset you want to talk with within 10 seconds.
To select the handset, press and then press the soft key. If you
select , all handsets will be paged. An intercom tone sounds. To cancel the transfer,
press or the soft key on the base.
3) Follow the steps 3-4 under "From handset to handset or to the base".
/volume up/down
talk/flash speaker
talk/flash
intcom/hold
/tone/< / >
intercom/hold speaker
talk/flash speaker
intercom/hold
/volume up/down
intercom/hold speaker
OK
CANCEL
,
ANSWER
,or #
ANSWER
From the base to the handset
OK
, CANCEL
All
All
Intercom
Handset #1
Line on hold
ANSWER
BACK OK
Hold, to transfer
Handset #3
Handset #2
[66]
EXPANDING YOUR PHONE