Unify OpenScape DECT Phone S5 Base - Registering Bluetooth devices; Editing the list of known (trusted) devices

104
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Bluetooth
Gigaset S850 / ALL UK en / A31008-XXXXX-XXXX-X-XX / applications_2.fm / 12/2/14
Registering Bluetooth devices
The distance between the handset in Bluetooth mode and the active Bluetooth device (headset
or data device) should not exceed 10 m.
¤ ... use to select Bluetooth OK Search for Headset / Search Data
Device OK . . . the search starts (may take up to 30 seconds) . . . the names of found devices
are displayed . . . possible options:
Editing the list of known (trusted) devices
Open the list
¤ . . . use to select Bluetooth OK Known Devices OK ... the
known devices are listed, an icon indicates the type of device
If a device is connected, the relevant icon is shown in the display header instead of .
Edit an entry
¤ ... use to select Bluetooth OK Known Devices OK ... use
to select entry . . . possible options:
The registration of a headset overwrites a previously registered headset.
If a headset is to be registered that is already registered with a different device, this
connection must be deactivated before registering.
Register device:
¤ Options Trust Device OK . . . use to enter the PIN of
the Bluetooth device to be registered OK . . . the device is added
to the list of known devices
Display information about a device:
¤ . . . use to select a device, if applicable View ... the device
name and device address are displayed
Repeat search:
¤ Options Repeat Search OK
Cancel search:
¤ Cancel
Bluetooth headset
Bluetooth data device
View an entry:
¤ View . . . the device name and device address are displayed Press
OK to go back
De-register a Bluetooth device:
¤ Options Delete entry OK
Edit name:
¤ Options Edit Name OK . . . use to edit name Save
If an active Bluetooth device is de-registered, it may try to re-connect as a "non-
registered device".