Startup
A31003-C1000-M102-5-76A9, 09/2017
32 OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual
inbetriebnahme.fm
Quick Start
Defining the scope for the new vendor class
11. Select the DHCP server in question and the Scope and right-click Scope Options. Select
Configure Options... in the context menu.
12. Select the Advanced tab. Under Vendor class, select the class that you previously de-
fined (OptiIpPhone) and, under User class, select Default User Class.
Activate the check boxes for the options that you want to assign to the scope (in the exam-
ple, 001, 002, and 003). Click OK.
13. The DHCP console now shows the information that will be transmitted for the correspond-
ing workpoints. Information from the Standard vendor is transmitted to all clients, whereas
information from the OptiIpPhone vendor is transmitted only to the clients (workpoints) in
this vendor class.
To Next Page
Loading...
Need help?
General
