Administration
A31003-C1000-M102-5-76A9, 09/2017
74 OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual
administration.fm
System Settings
3.5.6 Emergency number
E.911 emergency number. This number establishes a connection to the PSAP (Publiy Safety
Answering Point). If a user dials this number, and an appropriate LIN (see Section 3.5.7, “LIN”)
is configured, the user’s location is communicated to the PSAP. In the USA, the number is 911.
Administration via WBM
System > Features > Configuration
Administration via Local Phone
3.5.7 LIN
The Location Identification Number is a number code which provides detailed geographic in-
formation about the phone, including e. g. the office room. On issuing an emergency call using
the E.911 emergency number (see Section 3.5.6, “Emergency number”), this code is trans-
ferred to an ALI (Automatic Location Information) system in the public network. When the ALI
has looked up the location data in its database, it transmits the data along with the call to the
PSAP. The emergency operator is presented with the location data in readable form, so he can
dispatch help as appropriate.
Administration via WBM
|
--- Admin
|
--- System
|
--- Features
|
--- Configuration
|
--- General
|
--- Emergency number
Emergency number
Configuration
Submit
Reset
LIN
Not used timeout (minutes)
2
Emergency number
Configuration
Submit
Reset
LIN
Not used timeout (minutes)
To Next Page
Loading...
Need help?
General
