administration.fm
A31003-C1000-M102-5-76A9, 09/2017
OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual
63
Administration
IP Network Parameters
Data required
• DLS address: IP address or hostname of the server on which the Deployment Service is
running.
• Default mode port: Port on which the DLS Deployment Service is listening.
Default: 18443.
• Revert to default security: When set, security mode will be set to default. When using
local phone administration, this will be set by selection option ’Default security’ after press-
ing Save&exit.
• Contact gap: Minimum time interval in seconds that must elapse between responses to a
ContactMe request from the DLS, in order to prevent DoS attacks.
Default: 300.
• Mode: Determines whether the communication between the phone and the DLS is secure.
Value range: "Default", "Secure".
Default: "Default".
• Security PIN: Used for enhanced security.
Administration via WBM
Network > Update Service (DLS)
Administration via Local Phone
|
--- Admin
|
--- Network
|
--- Update service (DLS)
|--- DLS address
|--- Default mode port
|--- Revert to default security
|--- Contact gap
|--- Mode
|
--- Security PIN
Update service (DLS)
DLS address
Default mode port
Submit
Reset
192.168.1.10
Mode
Default
Contact gap
300
18443
Security PIN
300
Revert to default security
To Next Page
Loading...
Need help?
General
