Unify OpenSpace CP600 - Page 65

administration.fm
A31003-C1000-M102-5-76A9, 09/2017
OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual
65
Administration
IP Network Parameters
• Diagnostic sending enabled: Enables or disables the sending of diagnostic data to the
SNMP manager.
Value range: "Yes", "No"
Default: "No"
• Diagnostic destination: IP address or hostname of the SNMP manager receiving diag-
nostic data.
• Diagnostic destination port: Port on which the SNMP manager is receiving diagnostic
data.
• Diagnostic community: SNMP community string for the SNMP manager receiving diag-
nostic data.
• Diagnostic to generic destination: Enables or disables the sending of SNMP traps to a
generic destination.
Value range: "Yes", "No"
Default: "No"
• QoS traps to QCU: Enables or disables the sending of TRAP messages to the QCU serv-
er.
Value range: "Yes", "No"
Default: "No"
• QCU address: IP address or hostname of the QCU server.
• QCU port: Port on which the QCU server is listening for messages.
Default: 12010.
• QCU community: QCU community string.
Default: "QOSCD".
• QoS to generic destination: Enables or disables the sending of QoS traps to a generic
destination.
Value range: "Yes", "No"
Default: "No"