Administration
A31003-C1000-M102-5-76A9, 09/2017
88 OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual
administration.fm
Distinctive Ringing
Ringer setting and preview
The configuration of distinctive ringers overlaps considerably with the general ringer configura-
tion feature and the ability to preview (manually and automatically) what a ringer sounds like.
Data required
• Name: Selects the call type to be used. In OpenScape 4000, for “Speaker call” function the
call type “Rollover call” is used in the CorNet AU_RINGER_START message.
Value range OpenScape 4000: "Internal call", "External call", "Buzz call", "Rollover call",
"Alert (simple)", "Alert (multiple)", "Special #1", "Special #2", "Special #3", "Attention ring-
er", "Unspecified call", " US DSN precedence ring", "US DSN routine ring", "Emergency
call"
Value range OpenScape Business: "Internal call", "External call", "Attention ringer"
Default: "Internal call".
• Ringer sound: ‘Pattern’ or the name of the selected ring tone file. Sets the distinctive ring-
er to use the currently set pattern (melody and sequence). This is the pattern that will be
used if the configured ring tone file cannot be played for any reason.
Value range: "Pattern", "<audio file>"
Default: "Pattern".
• Pattern melody: Selects the melody pattern that will be used if Ringer sound is set to
"Pattern".
Value range: "1"... "8"
Default: "2".
• Pattern sequence: Determines the length for the melody pattern, and the interval between
the repetitions of the pattern.
Value range: "1": 1 sec ON, 4 sec OFF
"2": 1 sec ON, 2 sec OFF
"3": 0.7 sec ON, 0.7 sec OFF, 0.7 sec ON, 3 sec OFF
Default: "2".
• User changeable: Selects if the user is allowed to change destinctive ringer settings.
Value range: "Yes", "No"
Default: "Yes".
• Mode: Determines the source of ringer tone.
Value range: "HiPath ", "Local ringer"
Default: "HiPath".
Administration via WBM
OpenScape 4000: Admin > Ringer > Local ringers
To Next Page
Loading...
