Unify OpenStage 20 T - Enhanced Phone Functions: Call Parking; System-wide parking; Manually parking a call; Call park

Enhanced phone functions 37
System-wide parking
On HiPath 4000 systems, you can park up to ten internal and/or external calls
and retrieve them on another phone.
There are two options for parking a call:
• Automatic park
• Manual park
You cannot park calls if:
• All park positions are busy
• The park position you wish to use is busy
• The station is an attendant console
• The call is a consultation call
• The call is in a conference
Manually parking a call
You can manually park a call in a free park position from your phone, and retrieve
it on your phone or another phone. You can also perform this function on non-
display phones.
Call park
Select and confirm the option shown.
j Enter the destination number.
The call is now parked.
\ Replace the handset.
If "Park" is not available, you will receive acoustic and also visual notification.
Confirm and continue the call.
or
\ Replace the handset. You will receive a recall for the call on hold.
Retrieving a parked call
^ Lift the handset.
or
n Press the key and enter speakerphone mode.
Park to station? f
Return to held call? f