Enhanced phone functions 43
Using call forwarding
Automatically forwarding calls
The administrator can configure different call forwarding settings in the system
for internal and external calls and activate these settings for your station. The
following calls may be forwarded
• All calls without restriction
• Calls on busy
• Calls on no reply
Forwarding for all calls without restriction should only be configure if the station
is only used for outgoing calls (e.g.
in an elevator).
If you have configured fixed or variable forwarding and the manual forwarding
destinations are not reachable (e.g.
busy), calls are automatically forwarded to
system forwarding destinations.
Delayed call forwarding
This function is configured by the administrator for the system.
Prerequisite: The second call feature must be activated Page 31.
If you have activated "Call forwarding busy/no reply" or "Call forwarding no re-
ply" ( Page 22), you will hear a call waiting tone when a second call is received
and the caller information will appear in your display. You then have the option
of accepting this call before call forwarding is activated (e.g.
if you are waiting
for an urgent call).
The caller hears the ring tone and is only forwarded to another station once a set
time has elapsed.
Please note the description for programming call forwarding Page 22.
To Next Page
Loading...
Need help?
General