108 Special functions in the LAN (not for HiPath 500)
Opening a door
If this feature is configured (contact your service personnel), you can also acti-
vate the door opener in other HiPath 3000 communications platforms
Page 44.
c Open the idle menu Page 22.
Select and confirm the option shown.
j Enter the (DISA) station number of the HiPath 3000, where you wish to control
the relay.
i or ( Confirm your entry.
j Enter the (DISA) station number of the phone you wish to use to control the re-
lay.
i or ( Confirm your entry.
Select and confirm the option shown.
j Z Dial the entrance telephone number.
To Next Page
Loading...
