54 Enhanced phone functions
Assigning a station number (not for U.S.)
If this function has been configured (contact your service personnel), you can
selectively assign a specific number (DID number) to your telephone before
making an external call. The assigned number then appears on the called par
-
ty’s display.
N Open the Program/Service menu Page 27.
Select and confirm the option shown.
Confirm
1
.
j Enter the DID number you wish to use.
j Dial the external number.
Associated dialing/dialing aid
If this function has been configured (contact your service personnel), you can
use a dialing aid to dial numbers and set up calls for your telephone.
The operating procedure depends on whether the dialing aid is connected to the
S
0
bus or the a/b (T/R) port.
You can also use your system telephone as a dialing aid for other telephones.
Dialing aid on the S
0
bus:
On the PC, select a destination and start dialing.
^ The speaker on your telephone is switched on. Lift the handset when the other
party answers.
Dialing aid at the a/b (T/R) port:
On the PC, select a destination and start dialing.
"Lift the handset" appears on the PC screen.
^ Lift the handset.
Dialing aid from your telephone for another telephone:
N Open the Program/Service menu Page 27.
Select and confirm the option shown.
j Enter the internal station number ("Dial for:").
j Enter the number you wish to dial.
1. ”Differing display view in a HiPath 4000 environment” Seite 113
To Next Page
Loading...
