Unify OpenStage Busy Lamp Field 40

112 Testing the phone
Testing the phone
Phone functions, testing
You can test your phone’s functionality.
Prerequisite: The phone is in idle mode.
N Open the Program/Service menu  Page 27.
Select and confirm the option shown.
If everything is functioning correctly:
• all LEDs on the phone and on the key module flash
• your station number is displayed
• all pixels are active on the display
• the ring tone is audible
Checking the key assignment
You can check key assignment on your phone to determine which functions are
assigned to which keys.
N Open the Program/Service menu  Page 27.
Select and confirm the option shown.
S Press any key. The key assignment is displayed.
Select and confirm the option shown.
Phone test
Prog. feature key
Exit