Unify OpenStage Busy Lamp Field 40

Making calls in the team/executive/secretary configuration 95
Accepting a call for another team member
T Press the flashing DSS key or trunk key.
^ Lift the handset.
or On-hook dialing: Speakerphone mode.
Forwarding calls on trunks
You can immediately forward internal or external calls to different internal or ex-
ternal telephones (destinations). (External destinations require special configu-
ration in the system).
Activating call forwarding for one trunk activates the function for all trunk keys
assigned to this trunk in your group.
N Open the Program/Service menu  Page 27.
Select and confirm the option shown.
or
S If available, press the "CFW MULAP" key.
(You have programmed a key with the incomplete "CFW MULAP" function, ex-
cluding the call forwarding type and destination  Page 64.)
S Press the required trunk key.
or
j Enter the required trunk number.
Select and confirm the option shown,
or
select and confirm the option shown,
or
select and confirm the option shown.
j Enter the destination number.
Confirm.
or
S If available, press the "CFW MULAP" key. (You have stored the call forwarding
type and destination on the "CFW MULAP" key,
 Page 64.)
Forward Line: On
1=all calls
2=external calls only
3=internal calls only
Save