Unify OpenStage Busy Lamp Field 40

Enhanced phone functions 69
Changing the label
The label set when a repdial key was programmed can also be subsequently
changed.
Changing the label
S Hold down the key shown.
Confirm the option shown.
or
N Open the Program/Service menu  Page 27.
Select and confirm the option shown.
S Press the required key.
if nec.
Select and confirm the option shown.
Select and confirm the option shown.
Confirm.
j Enter text via the keypad (max. 12 characters)  Page 21.
Select and confirm to reset to the default label.
Confirm to apply the changes.
or
Select and confirm to reject the changes made.
Confirm.
Deleting sensor key programming
L
Deleting a function/phone number/label
S Press and hold the required sensor key.
Select and confirm the option shown.
You cannot change the labels on function keys.
Assign telephony function
Prog. feature key
+=Next layer
Key label
Change
Default label
Save
previous
Exit
Adapt the contrast of the key label to your surroundings  Page 109.
Clear key