Unify OpenStage Busy Lamp Field 40

Basic functions 37
Call forwarding
Using variable call forwarding
You can immediately forward internal or external calls to different internal or ex-
ternal telephones (destinations). (External destinations require special configu-
ration in the system.)
r Press the key shown.
or
c Open the idle menu  Page 22.
Select and confirm the option shown.
Confirm,
or
select and confirm the option shown,
or
select and confirm the option shown.
j Enter the destination number.
Confirm.
Deactivating call forwarding
r Press the key shown.
or
Select and confirm the option shown.
When call forwarding is active, a special dial tone sounds when you lift the
handset.
If DID DTMF is active (contact your service personnel), you can also for-
ward calls to this destination. 
Destinations: fax = 870, DID = 871, fax DID = 872.
The call forwarding key flashes if you are a call forwarding destination
 Page 17.
Special features must be taken into consideration if your telephone oper-
ates with HiPath 5000 (system networking via PC network)  Page 103!
Forwarding on
1=all calls
2=external calls only
3=internal calls only
Save
Forwarding off