Code 128 / GS1-128 - ISBT 128 - transmit - Only transmit concatenated codes
<SW>435A01
Code 128 / GS1-128 - ISBT 128 - transmit - Transmit concatenated codes or
single codes
<SW>435A02
•
••
•concatenate
- IMPORTANT:
- Codes are not concatenated by default (default transmission
setting is "single codes only").
- You must select one of the "concatenated codes" transmission
options to send concatenated codes (see "transmit" section).
Code 128 / GS1-128 - ISBT 128 - concatenate - Disable (only those specified
by datasheet) (*)
<SW>435B00
Code 128 / GS1-128 - ISBT 128 - concatenate - Enable
<SW>435B01
•
••
•GTIN processing
- GTIN = Global Trade Item Number.
- GTIN processing transmits GS1-128 as the 14 character GS1 Composite
GTIN.
- To use GTIN processing you must also activate the GS1-128 symbology.
- IMPORTANT: when GS1-128 and GTIN processing are both activated it is not
To Next Page
Loading...
