Unitech MS920 User Manual

123
<SW>704500
Scanning / Triggering - Aimer mode - One pull aim and read
<SW>704501
Scanning / Triggering - Aimer mode - One pull aim, second pull read
<SW>704502
•
••
•Duration
- Duration is applied differently depending on the aiming beam mode:
- First pull aim and read:
- Duration is the time the aiming beam stays on before reading begins
- First pull aim, second pull read:
- Duration is the maximum time between the first pull and second pull
- If you wait longer than the duration before the second pull, the cycle starts
over with the aiming beam.
Scanning / Triggering - Aimer mode - Duration (ms) - 500 (*)
<SW>708101F4
Scanning / Triggering - Aimer mode - Duration (ms) - 1200
<SW>708104B0

Unitech MS920 Specifications

General

Brand	Unitech
Model	MS920
Category	Scanner
Language	English