- 87 -
MS926 User’s Manual
4.6.10 Video Reverse
Video Reverse is used to allow the scan engine to read bar codes that are
inverted. The Video Reverse Off bar code below is an example of this type of
bar code. Scan Video Reverse Only to read only inverted bar codes. Scan
Video Reverse and Standard Bar Codes to read both types of codes.
Note: After scanning Video Reverse Only, menu bar codes cannot be read. You must scan
Video Reverse Off or Video Reverse and Standard Bar Codes in order to read menu
bar codes.
Note: Images downloaded from the unit are not reversed. This is a setting for decoding only.
Video Reverse Off *
Video Reverse and Standard Bar Codes
Video Reverse Only
To Next Page
Loading...
