- 90 -
MS926 User’s Manual
4.7.2 To Clear One or All Prefixes or Suffixes
You can clear a single prefix or suffix, or clear all prefixes/suffixes for a
symbology. If you have been entering prefixes and suffixes for single
symbologies, you can use Clear One Prefix (Suffix) to delete a specific
character from a symbology. When you Clear All Prefixes (Suffixes), all the
prefixes or suffixes for a symbology are deleted.
Step 1. Scan the Clear One Prefix or Clear One Suffix symbol.
Step 2. Determine the 2 digit Hex value from the Symbology Chart (included in
the Symbology Charts) for the symbology from which you want to clear
the prefix or suffix.
Step 3. Scan the 2 digit hex value from the Programming Chart or scan 9, 9 for
all symbologies.
Your change is automatically saved.
To Next Page
Loading...
