Unitech MS926 - Matrix 2 of; Matrix 2 of 5 Message Length

- 37 -
MS926 User’s Manual
3.3.8 Code 11
Code 11 On
Default All Code 11 Settings
Code 11 Off*
3.3.8.1 Check Digits Required
This option sets whether 1 or 2 check digits are required with Code 11 bar
codes. Default = Two Check Digits.
One Check Digit
Two Check Digits*
3.3.8.2 Code 11 Message Length
Scan the bar codes below to change the message length. Refer to Message
Length Description for additional information. Minimum and Maximum lengths
= 1-80. Minimum Default = 4, Maximum Default = 80.
Minimum Message Length
Maximum Message Length