Unitech MS926 - Chapter 3 - Symbology; All Symbologies; Message Length Description

- 24 -
MS926 User’s Manual
For a value other than the minimum and maximum message length defaults,
scan the bar codes included in the explanation of the symbology, then scan the
digit value of the message length and Save bar codes on the Programming
Chart. The minimum and maximum lengths and the defaults are included with
the respective symbologies.
3.3 1D
3.3.1 Codabar
Codabar On*
Default All Codabar Settings
Codabar Off
3.3.1.1 Codabar Start / Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters.
Default = Don’t Transmit.
Transmit
Don’t Transmit*