Unitech MS926 - Mobile Phone Read Mode

- 85 -
MS926 User’s Manual
4.6.7 Reread Delay
This sets the time period before the scan engine can read the same bar code a
second time. Setting a reread delay protects against accidental rereads of the
same bar code. Longer delays are effective in minimizing accidental rereads.
Use shorter delays in applications where repetitive bar code scanning is
required. Reread Delay only works when in a Presentation Mode.
Default = Medium.
Short (500 ms)
Medium (750 ms)*
Long (1000 ms)
Extra Long (2000 ms)
4.6.8 Aimer On/ Off
This feature allows you to turn the aimer on and off. When the Interlaced bar
code is scanned, the aimer is interlaced with the illumination LEDs. Default =
Interlaced.
Interlaced*
Off